Four loops go together to make the basic square so feed each one into the next as shown and pull together. try to keep the sides with the glued tab on the same side, which will be inside when you do the dog. I call this a group...
Add another three loops and expand the shape and you will see that it all holds together and you are left with square "holes" in the matrix.
This is the basis for the entire construction and the thing to remember is that to turn the weave inwards, you need to create a triangular hole and to turn it outwards, you need to create a pentangled five sided hole. This is achieved by missing a few loops and turning it in on itself for a triangular hole and doing an
Here is the way to make the matrix curve with a triangular hole.
If you continue around the shape you will end up pushing one loop through to secure the lot and ending up with a rounded end as shown below.
if the loops are difficult to feed through in places you can ease out the card with a suitable tool such as a small screwdriver or similar.
This shape is the starting point for the legs, tail and head so you will be making quite a few of them. you can also close the ends up and make it into a ball shape. I have seen one of these dangling on a string from someone elses dog. Cats like chasing them around as well...
No comments:
Post a Comment